Using the Hood

The hood has an engine with various speeds. For a good performance, we recommend using low speeds under normal conditions and high speeds in case of strong odour and vapour condensation.

NOTICE

notice

The program is cancelled if power is cut when any program in your hood is active.

1

Automatic mode key

2

On-Off/Speed 1 key

3

Speed 2 key

4

Speed 3 key

5

Booster key

6

Lamp key

Operating the hood

  1. Touch the speed level key you have selected to operate the hood.
  2. The set speed level key lights up.
  3. You can touch the other speed level keys to change the speed level.

NOTICE

notice

When in operation, the product will run for a maximum of 6 hours if no key is touched.

Turning off the hood

  1. To turn the hood off, touch again the key of the level on which the hood is operating or key.

NOTICE

notice

If you touch the key with any function active except the lamp, then the function is cancelled.

Operating the lamp

  1. Touch the key to operate the lamp.

NOTICE

notice

The illumination lamps operate for a maximum of 12 hours.

Turning off the lamp

  1. You can turn it off by touching the key again.

Setting the lamp illumination intensity

You can use the intensity of your hood's illumination lamps at 2 different levels: high and low.

  1. Touch the key to operate the lamp.
  2. Hood lamp lights. If you touch the key again within the first 1 minute, the lamp will continue to light at the low illumination level.
  3. To set the lamp illumination level back to high, first turn off the lamp by touching the key. Turn it on again by touching the key and touch the key again within the first 1 minute.
  4. The lamp will continue to light at the high illumination level.

Setting the lamp illumination colour

You can use the colour of your hood's illumination lamps in 3 different shades.

  1. With the hood lamp turned on, touch key for more than 2 seconds.
  2. The lamp changes to the other colour shade.
  3. If you continue to touch the key, it will change to the next colour shade after every 2 seconds. According to the desired colour shade, stop touching key when the lamp is in that colour shade. The colour shade will automatically activate.

NOTICE

notice

You can only change the light colour shade while the lamp has high light intensity.

NOTICE

notice

In the event of a power outage, your hood will remember the colour shade set and the lamp will work in the colour that was last set.

Turning on the intensive ventilation mode (Booster)

  1. Press key once to start the hood in the intensive ventilation mode.
  1. The intensive ventilation mode starts up and runs for a maximum of 10 minutes. During this time, the key lights up. After 10 minutes, the product continues to operate in Speed 3 and the Speed 3 key lights up.

NOTICE

notice

In intensive ventilation mode, when any speed key is touched, it returns to that speed level and continues to operate.

Automatic mode

Your hood measures the temperature of the air in the kitchen and the air coming from your hob by using a sensor. In automatic mode, it determines the required levels for the temperature of the air from the hob to match the temperature of the air in the kitchen and operates at levels determined automatically.

  1. To enable the automatic mode touch the key.
  2. The automatic mode is activated and operates until the temperature of the air from the hob equals the ambient temperature. It will switch off automatically when the temperature equalizes. You must enable automatic mode again to re-switch it on.

  3. NOTICE

    notice

    While automatic mode is active, automatic mode will be cancelled when you turn the product on and off at any speed.

  4. To turn automatic mode off early touch the key once more.

NOTICE

notice

If you open the cover of the product when auto mode is on, its performance will decrease. Do not open the cover when the automatic mode is active.

NOTICE

notice

If the ambient temperature difference occurs even when the hob is not operating while the automatic mode is active, the temperature sensor in the product will detect the difference and the product may start operating at Speed 2 or 3 depending on the difference. In this case, automatic mode will be turned off when the temperature difference is equalized.

NOTICE

notice

Do not use automatic mode when your hob is not working.

Air cleaning mode

You can use air cleaning mode to eliminate the odour in your house during a long time at low level.

  1. Touch the Speed 1 key for more than 3 seconds.
  2. Air cleaning mode is activated. The light of the Speed 1 key flashes when the air cleaning mode is active.
  3. The air cleaning mode will operate at Speed 1 for 10 minutes in 1 hour and will stop for 50 minutes. If you do not switch off the air cleaning mode, it will remain in operation for 10 minutes, then stop for 50 minutes in each hour for 24 hours.

NOTICE

notice

When air cleaning mode is active, it is automatically cancelled at the touch of any key except lamp key. Your hood continues to operate at the function of the key you touch.

Aluminium filter fill warning

The light of Speed 2 key flashes for thirty seconds after every 100 hours of operation. Clean the aluminium filters. After cleaning, the lamp warning of Speed 2 key does not turn off automatically. This product continues to show the 30-second warning when the product switches off after every operation. When you touch the Speed 2 key for more than 3 seconds, aluminium filter fill warning is reset and the lamp is turned off.

NOTICE

notice

The warning is not cancelled if the power is cut when the hood gives aluminium filter fill warning. When the power is available, it continues to warn with the light of Speed 2 key flashing.

NOTICE

notice

If you run the hood at any speed level with the aluminium filter fill warning, the warning will not appear for as long as the hood is running. When you turn off the hood, the fill warning starts flashing again for 30 seconds.

NOTICE

notice

If you turn off the warning without cleaning the aluminium filter, the operating time of 100 hours is reset and it starts over. At the end of the next 100 hours, your hood warns again.

Carbon filter fill warning (for products with carbon filter)

The light of Speed 2 key flashes for thirty seconds after every 100 hours of operation. In this case, you must replace your carbon filter. Consult an authorized service for this. After replacement, the lamp warning of Speed 2 key does not turn off automatically. This product continues to show the 30-second warning when the product switches off after every operation. When you touch the Speed 2 key for more than 3 seconds, carbon filter fill warning is reset and the lamp is turned off.

NOTICE

notice

The warning is not cancelled if the power is cut when the hood gives carbon filter fill warning. When the power is available, it continues to warn with the light of Speed 2 key flashing.

NOTICE

notice

If you run your hood at any speed level with the carbon filter fill warning, the warning will not appear for as long as the hood is running. When you turn off the hood, the fill warning starts flashing again for 30 seconds.

NOTICE

notice

If you turn off the warning without replacing the carbon filter, the operating time of 100 hours is reset and it starts over. At the end of the next 100 hours, warning is given again.