Spin Speed Selection

When you select a program and spin speed setting screen, the screen will display the recommended spin speed for that program. It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme. Press the spin speed adjustment button to change the spin speed. Then use the "</>" symbols to select the permissible spin speed. If you are not allowed to increase or decrease the spin speed value, the relevant arrow will turn on partially.

NOTICE

In programs where OptiMix is used, the spin speed may be updated automatically during the washing cycle to protect your laundry after necessary detections, depending on the product model.

The display will then show the options "Rinse Hold l_l" and "No Spin--" depending on the model of the device.

If you are not going to unload your laundry immediately after the programme completes, use Rinse Hold function in order to prevent your laundry from getting wrinkled when there is no water in the machine. This function holds the laundry in the final rinsing water.

If you want to spin your laundry after the Rinse Hold function:

If you want to drain the water at the end of the programme without spinning, use the No Spin function.

NOTICE

No change can be made in programmes where spin speed adjustment is not allowed.

You can change the spin speed also after the washing cycle has started in the allowable washing steps using the procedure described above. If not allowed, when you press the spin speed setting button, the selected spin speed will be displayed on the screen but the symbols “< / >” will not be displayed and you will not be allowed to select a spin speed.

Rinse Hold

If you are not going to unload your clothes immediately after the program completes, use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine.

After performing this operation, adjust the desired spin speed for the laundry remaining in the water and press the Start/Pause button. The programme will resume. Water is drained, laundry is spun and the programme is completed.

If the Start/Pause button is pressed before the spin speed is set, water is drained and the program ends without spinning.