Risk of Life and Property

• Do not place the appliance on a surface covered with carpets. Electrical parts may overheat as there will not be any air circulation from underneath. This may cause the product to breakdown.
• Unplug the product when not in use.
• Installation and repair should always be performed by Authorized Service. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorized persons.
• Water mains and drain pipe should be securely fixed and undamaged. Otherwise, there is a risk of water leakage.
• Never open the loading door or remove the filter when there is still water inside the product. It may cause flooding and injury due to hot water.
• Do not force open the locked loading door. The door will open once the washing is completed. If the door does not open, apply the solutions provided for “Loading door cannot be opened.” error in the Troubleshooting section. If you force open the loading door, the cover and locking mechanism may be harmed.
• Only use detergents, softeners and additives suitable for automatic washing machines.
• Follow the instructions on the packaging of textile products’ labels and detergents.
• Laundry cleaned, washed, soiled or stained with gasoline/diesel oil, dry cleaning dissolvent or other combustible and explosive materials can eject ignitable or explosive fumes and therefore they should not be washed with Refresh program or Clean & Wear auxiliary function. They may cause risk of fire.
• Laundry stained with liquid cooking oil, acetone, alcohol, benzene, paraffin oil, stain remover, turpentine, wax and wax remover should be first washed in hot water with plenty of detergent. After the washing program, they can be used in Refresh program and Clean & Wear auxiliary function.
• Latex foam, shower caps, watertight textile products, products including rubber and clothing or pillows supported with latex foam pads should not be used with Clean & Wear auxiliary function and Refresh program. They may cause risk of fire.
• If you are using washing balls, detergent scales, clothing cages and balls in your machine, they may melt during drying. Do not use in Refresh program and Clean & Wear auxiliary function. They may cause risk of fire.
• Never operate the Refresh program and Clean & Wear auxiliary function when you use industrial chemicals for cleaning. They may cause risk of fire.
• Do not touch the cover glass with bare hands after drying. Risk of burns.
• In the Refresh and Clean & Wear auxiliary function, there is a cooling step in order to ensure that the clothing remains at temperatures that do not harm the users. You may be exposed to hot steam if you open the cover without completing the cooling step. Risk of seething.
• If the program is cut short in Refresh and Clean & Wear auxiliary function (program cancellation or power cut), the laundry inside the machine can be hot. Caution.
• Do not stop the machine in Refresh and Clean & Wear auxiliary function before completing the aforementioned steps. If you have to stop the machine, take out the laundry and lay them somewhere to cool down.
• Your product is suitable to operate between ambient temperatures of 0 °C and +35 °C.
• Ideal operating temperature for your product is 15 °C and +25 °C.
• Make sure pets do not climb inside the product. Check inside the product before use.
• Do not overload the machine and operate the Refresh program and Clean & Wear auxiliary function. Follow the maximum load amounts specified.
• Leather clothes or laundry containing leather should not be used for Refresh program and Clean & Wear auxiliary function selection. Leather clothes colour.
• In breakdowns that cannot be resolved with the information provided in safety instructions, shut down the machine, unplug and call the Authorised Service Agent.
• The machine should not be used in Refresh program for long time; if it is being used for long time, in one of the short washing programs after each 15 use, it should be operated without any laundry, empty.
• All laundry should be checked and made sure there are no lighters, coins, metal parts, needles, etc. inside them or in their pockets before the machine is loaded.
• Laundry containing metal supports should not be used for Refresh program and Clean & Wear auxiliary function selection. Metal supports may loosen up during drying, may come off and cause damage to the machine.
• Tulle curtains, blankets, quilts and similar voluminous laundry should not be washed in Refresh program and Clean & Wear auxiliary function. Otherwise, your laundry may be damaged.
• Do not use fabric softeners or anti-static agents in the machine unless recommended by the manufacturer.
• Fabric softeners and similar products should be used according to the instructions of the manufacturer.
• Delicate clothes containing silk, wool, etc. should not be used for Refresh program and Clean & Wear auxiliary function selection. Otherwise, woolen clothes can shrink and damage may be caused in other delicate clothes.
• Check the symbols on the product label for the laundry and then, start the program.