Connecting External Data Media

It is advised to put the television on stand-by mode before connecting the External Data medium. Connect the device and then switch the television on again.

Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged.

Notes:

If you are using a power cable for the external hard drive that you have connected to the USB interface, then the power cable of the external hard drive shall also be unplugged when the TV is turned off.

You must not disconnect the USB Device from the TV while a file on the USB Device is being read by the TV.
A bi-directional data transfer as defined for ITE (Information Technology Equipment) devices in EN 55022/EN 55024 is not possible.
USB transfer is not an operating mode in itself. It is only an additional function.

Plug the external hard drive or the memory stick to the USB port of the TV set.