Automatic Search for Digital Television Channels with Single Satellite Connection

New satellite channels are added or satellite data is changed frequently. Therefore, we recommend you to run auto scan function from time to time.

All transponders are scanned for new channels.

NOTICE

If there is a direct cable connection from your satellite antenna to the TV set, and if there is no common satellite antenna switchboard, you need to search over a single cable.

Press the

to switch to the TV mode.

Press the

, select Source and press the

Select Satellite and press the

Press the

, select Settings and press the

Select Channels & Inputs option, and press

Select Channels option, and press the

Channel menu will be displayed.

Select Satellite and press the

Select Channel Installation Mode option, and press the

Select Satellite (Standard) or Satellite (Operator Mode) if you are using an operator, and press the

Press the

to return to the previous menu.

Select Automatic Channel Scan option, and press the

Automatic Channel Scan menu will be displayed.

Select Other option, and press

Select Single option, and press the

Select Current Satellite option, and press the

Select Satellite Selection using the

and use the to select the satellite you wish to use for searching.

Select Scan Mode and use to select Network or Full.

Select Scan Type.

Select Only Free Channels for unencrypted channels only
Select Encrypted Channels Only for encrypted channels only
Select All for all satellite channels.

Select Store Type.

Select Only Digital Channels for TV channels only
Select Only Radio Channels for radio channels only
Select All for scanning both options.

Press the

to return to the previous menu.

Select Next option and press the

Automatic Search menu will be displayed and the search for TV stations shall start.
Search may take several minutes depending on the number of television stations received.

Note:

If some of the frequencies are not stored completely due the changes parameters satellite parameters made by the broadcaster, it is recommended to set the Scan Mode as Network.

Press

to return to the previous menu, press

to return to TV broadcast or press

to return to Home menu.