Electrical Safety

WARNING

IMPORTANT SAFETY INSTRUCTIONS. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Immediately followed by: Read all security warnings, instructions, illustrations and specifications provided with this appliance.

The product shall not be plugged into the outlet during installation, maintenance, cleaning, repair, and transportation operations.
Standby LED is off when the mains plug is disconnected. If the Standby LED is lit then it means that your product is connected to the mains.
Do not dismantle the product. Security risks may arise and also the guarantee of the product can become void if the television is dismantled.
The product can only be operated with the power cord or the AC/DC adapter supplied with the product.
Do not operate the product with a damaged power cord/AC/DC adaptor (if supplied).
If the plug on the product has an earthing contact, only insert the plug into a socket with an earthing contact.
Only plug the product into the mains socket after you have connected the external devices and the antenna.
If the power the cord is damaged, it shall be replaced by authorized service only to avoid any risk that may occur.
Do not jam the power cord under and behind the product. Do not put a heavy object on the power cord.
The power cord should not be bent, crushed, and come into contact with any heat source.
Never use an extension cord or a multi socket to operate your appliance.
The product shall not be supplied with an external switching device such as a timer or it shall not be connect it to a circuit that is regularly turned on and off by a device.
The plug of the product shall be in an easily accessible place. If this is not possible, there should be a mechanism (fuse, switch, switch, etc.) on the electrical installation to which the product is connected, in compliance with the electrical regulations and separating all poles from the network.
Do not touch the plug of the product with wet hands.
Do not unplug the product by holding the cable, hold the plug to unplug the product.