Manual Search for Digital Television Channels with Single Satellite Connection

If a certain channel cannot be found with automatic scan, scan it by manual scan. You must enter all parameters of the channel correctly. You can obtain the current transponder information from Teletext page, satellite TV magazines or internet.

NOTICE

If there is a direct cable connection from your satellite antenna to the TV set, and if there is no common satellite antenna switchboard, you need to search over a single cable.

Press the

to switch to the TV mode.

Press the

, select Source and press the

Select Satellite option, and press the

Press the

, select Settings and press the

Select Channel option, and press the

Channel menu shall be displayed.

Select Channel Installation Mode option, and press the

Select Satellite (Standard) option, and press the

Select Channels option, and press the

Channels menu shall be displayed.

Select Manual Channel Scan option, and press the

Select Current Satellite option, and press the

Manual Channel Scan menu shall be displayed.

Select Transponder option, and press the

Satellite Detail Transponder menu shall be displayed.

Press the to select the required items and press the

to confirm.

Frequency - Enter the channel frequency in 5 digits with the .
Symbol - Enter the channel symbol rate in 5 digits with the .
Polarization - Select channel polarisation as Vertical, Horizontal, Left or Right.

Press the

to return to the previous menu.

Select Next option and press the

Automatic Search menu shall be displayed and the search for TV stations shall start.
Search may take several minutes depending on the number of television stations received.

Press

to return to the previous menu, press

to return to TV broadcast or press

to return to Home menu.