Initial Set-up and Setting the TV set

Connect the antenna and external device cables.

Insert the power plug into the socket.

Switch on the TV set with the

on the remote control.

The Welcome menu shall be displayed on the screen after a while.

Select language.

Accessories menu shall be displayed. If you do not want to pair a Bluetooth accessory, press

In order to pair the Bluetooth remote control, press

and

simultaneously for 5 seconds.

The white LED on the remote control starts to flash.

Bluetooth devices found shall be displayed. Select Android TV Remote Control option, and press the

This completes the pairing of the remote control and the TV set.

Important:

If you have problems in pairing the Bluetooth remote control, you need to reset it. To do this, press and hold and on the remote control simultaneously for 5 seconds.

Note:

You may perform the set-up of the product either quickly or manually.

Quick Set-up: You may transfer the network settings and account settings easily from an Android phone.
Manual Set-up: Enter all settings manually.

Quick Set-up

Select Continue option, and press the

Follow the instructions displayed on your TV and on the screen of your phone.

Network Privacy Policy shall be displayed.

Select Agree option, and press the

Google Services shall be displayed.

Select Agree option, and press the

Google Assistant menu shall be displayed.

Select Continue option, and press the

To receive the individual results, select the On option, and press the

or select the No, thanks option, and press the

To receive e-mails that would allow you to follow the latest features of the assistant, select Yes or if you do not want to receive e-mails, select No and press the

Select the applications you want to install from the list of the recommended applications and select the Continue option, and press the

This completes the Android installation. Press the

or the

successively to review the features of your appliance.

Note:

If you have performed a Quick Set-up, resume with the Other Settings section.

Manual Set-up

Select Skip .

Select your wireless network with the and press the

Enter the wireless network password with the screen keyboard, select

and press the

After the Connecting to ....... network message, the Successfully Connected to Internet message shall be displayed.
Network Privacy Policy shall be displayed.

Select Agree.

Select Sign-in.

Enter the e-mail address with the screen keyboard.

Select on the display and press the .

Enter the password for the account with the screen keyboard.

Select on the display and press the .

Follow the instructions displayed on your TV and on the screen of your phone.

Select Agree.

Google Services shall be displayed.

Select Agree.

Google Assistant menu shall be displayed.

Select Continue option, and press the

To receive the individual results, select the On option or the No, thanks option, and press the

To receive e-mails that would allow you to follow the latest features of the assistant, select Yes or if you do not want to receive e-mails, select No and press the

Select the applications you want to install from the list of the recommended applications, select the Continue option, and press the

Android set-up is complete. Press the

to review the features of your appliance.

Other Settings

Select the country.

Press the

to set a password.

On the password screen displayed, use to enter the password 1 2 3 4 and then press the

On the confirmation screen displayed, use to re-enter the password 1 2 3 4.

Select the TV Mode menu shall be displayed.

Select Home or Store and press the

Home mode: This option is optimized to provide energy efficiency when the TV set is used in a household.
Store mode: This option is optimized to allow demo display on a store with fixed settings.

To turn on the built-in Chromecast feature, select On and press the

Note:

Keeping the built-in Chromecast feature continuously on increases the energy consumption.

Select the antenna type.

The next procedure depends on the selected antenna type. Continue with Searching for Satellite Channels, Searching for Cable Channels or Searching for Terrestrial Channels as per the antenna type you have selected.

Searching for Satellite Channels

Select Satellite.

Satellite Antenna Type menu shall be displayed.

Select Single Cable option, and press the

Select Operator menu shall be displayed.

Note:

As per the satellite system used, select DiSEqC 1.0, DiSEqC 1.1, DiSEqC 1.2, Single Cable I, Single Cable II or Tone Burst.

Select Standard or Operator and press the

Satellite Selection menu shall be displayed.

Select the satellite displayed on the list and press the

Satellite Settings menu shall be displayed.

Select the Satellite Status option, and use the

to select On.

Select Satellite Selection option, and press the

Satellite Selection menu shall be displayed.

Select the satellite you want to scan for from the list and press the

Select Scan Mode option, and press the

Scan Mode menu shall be displayed.

Select Network or Full and press the

Select Scan Type option and press the

Scan Type menu shall be displayed.

Select Scan Type.

Select Only Free Channels for unencrypted channels only;
Select Encrypted Channels Only for encrypted channels only;
Select All for all satellite channels.

Select Store Type.

Store Type menu shall be displayed.

Select Store Type.

Select Only Digital Channels for TV channels only;
Select Only Radio Channels for radio channels only;
Select All for scanning both options.

Important:

If you encounter a significant shortage of channels or no signal, make sure that the cable connection, signal level, Diseqc A/B/C/D and LNB selections are made correctly.

Press the

to return to the previous menu after completing the settings.

Select Next option and press the

Channel Scan menu shall be displayed.

Select Scan option, and press the

Scanning menu shall be displayed and the scan for TV stations shall start.
The scan is complete when the FINISH message is displayed.

Press

to complete the set-up and exit.

Smart TV Terms of Service shall be displayed.

Select Agree option, and press the

Searching for Cable Channels

Select Cable.

Channel Scan menu shall be displayed.

To start scanning for channels, make your selection and press the

Cable Scan Configure menu shall be displayed.

Select Scan Mode option, and press the

Select Full, Advanced or Quick and press the

To start scanning for channels, press the

Scanning menu shall be displayed and the scan for TV stations shall start.
The scan is complete when the FINISH message is displayed.

Press

to complete the set-up and exit.

Smart TV Terms of Service shall be displayed.

Select Agree option, and press the

Searching for Terrestrial Channels

Select Antenna.

Antenna Setup menu shall be displayed.

Select Scan Type and Store Type.

Select Next and press the

Channel Scan menu shall be displayed.

To start scanning for channels, make your selection and press the

Scanning menu shall be displayed and the scan for TV stations shall start.
The scan is complete when the FINISH message is displayed.

Press

to complete the set-up and exit.

Smart TV Terms of Service shall be displayed.

Select Agree option, and press the