Error Codes, Causes and Solutions

Error Code

Cause

Solution

E01 Warning

P1 Blinks (depends on the model)

Chassis water filling fault

1-Error algorithm is activated.

2-Cycle ends.

If you see the error continuously,

1-Cut off the electricity.

2-Close the valve.

3-Get in touch with the authorized service.

E02 Warning

P2 Blinks (depends on the model)

Water outage error

Check the water supply.

Filter is blocked

1-Cut off the electricity connection.

2-Cut off the water connection.

3-Remove water inlet hose.

4-Check and clean the filter.

5-Establish the water connection.

6-Establish the electricity connection.

Other

If the error continues,

1-Close your machine.

2-Get in touch with the authorized service.

E06 Warning

Temperature sensor in the machine is faulty

If you see this error continuously and washing performance has reduced,

1-Close your machine.

2-Get in touch with the authorized service.

E07 Warning

Flowmeter is faulty

1-Error algorithm is activated.

2-Cycle ends.

If you see the error continuously,

1-Cut off the electricity.

2-Close the valve.

3-Get in touch with the authorized service.