Adjusting the height of the upper basket

(depends on the model)

Upper basket height adjustment mechanism is designed so that you can create wide spaces on the upper or lower compartment of the machine by adjusting the basket upwards or downwards either while it is empty or full.

Thanks to this mechanism, you may use your basket in three different positions, namely lower, centre or upper positions.

  1. To raise the basket, hold the wires of the basket and pull the basket upwards with both hands while the basket is at the lowermost position (A)
  2. Release the basket when the basket catches on to the next upper position with a “Click” that may be heard from the right and left mechanisms.

Repeat the same operation if the height is not adequate.

To lower the basket, perform the following while the basket is at uppermost position;

  1. Holding the upper basket wires with both hands and lifting the basket slightly upwards, press and release the latches shown in the figure (B) at the same time.
  2. Lower the basket to the next lower position.
  3. Release the basket when it catches on to the next lower position.

Repeat the same operation if the height is not adequate.

 

NOTICE

notice

The movement mechanism may not work properly when the upper basket is overloaded or when the load is unbalanced. And it may fall to the next lower position in heavier conditions.

NOTICE

notice

Ensure that the adjustment mechanisms on the right and left of the upper basket are aligned.