Rinse aid

The rinse aid used in dishwashers is a special compound to improve drying efficiency and to prevent traces of water or limescale from remaining on the washed items. For this reason, make sure that there is rinse aid in the rinse aid compartment and use only rinse aid that is intended for use in dishwashers.

Filling the rinse aid

  1. Open the rinse aid cap with the latch.
  2. Fill the compartment to the MAX level.
  3. Close the compartment lid by pressing it lightly against point (B).
  4. Increase the setting if water marks appear on the crockery after washing, or decrease it if a blue mark remains when wiped by hand. This setting is set to position 3 at the factory.

 

NOTICE

notice

The rinse aid setting is described under the heading "Adjusting the rinse aid quantity" in the operation of machine section.

NOTICE

notice

Wipe off any rinse aid spilled outside the chamber. Accidental spillage of rinse aid will cause foaming and reduce washing performance.